The Rollbak tonneau cover has so many features I could probably sit here and type all day long about it. I will try to resist myself and make this short and sweet. The Rollbak truck bed cover is made by Bak Industries and is one tough tonneau cover.
It is a retractable tonneau cover which retracts into a canister behind the truck cab. The canister is made of a rugged ABS which is very durable and with its rounded design is made to expel water. The average canister is about 8.5 inches in diameter and some are even smaller which leaves you with an added space under the canister in the front of the truck bed.
The side rails are lined with high density polyethylene which is even better than Teflon as Teflon freezes. You never have to grease this, and it will work well in all types of weather. Hot, cold, wet or dry, this cover is made for all weather.
The slats of the rollback retractable tonneau cover are made of powder coated industrial strength aluminum strong enough to withstand over 400 pounds. The slats are designed to channel water to the side tracks and then to the ABS canister and then out the bottom of the truck through hoses. The way the slats are designed, even if any water does get through the surface of the slats, it is still channeled to the side tracks.
The system is designed to stop every twelve inches as you close it so you can close it pretty much anywhere you want. The Rollbak truck bed cover locks automatically when closed all the way. There is no visible latch or locking system as it latches underneath the tonneau cover. You have to open the tailgate to access the latch for the truck bed cover. Then if you install a locking tailgate latch your tonneau cover is a very secure storage area. You can lift or lower the tailgate without moving the tonneau cover and the stake holes along the side of your truck bed remain uncovered which is great for any type of rack you use or tie downs.
The powder coat flat paint is a very durable finish which you can wax as you would the rest of your truck body. The installation is a no drill clamp system, but many applications use two self tapping screws at the front inside corners.
Listening to testimonials, mostly everyone loved the look and action of the Rollbak tonneau cover. However they pretty much all had a problem with the instructions that came with the truck bed cover. They were pretty vague and conflicted with the installation video on the Bak Industries website. It seems they were all able to get through the installation but would be much faster at it if they had to do it again. Even with the poor installation instructions they all said it was worth the troubles once they had it on.
All rights reserved. Ken Bishop is the author of this article and permits the use of this article as long as this resource message remains with it and the links remain usable. For more tonneau cover reviews or to buy visit www.truckbedtonneau.com. You can even get a free tonneau cover report. |
|
